DSP_StereoEnhancer Properties

This property returns the actual bitwidth of the sample data of the channel (e.g. 8, 16, 32).

Gets or Sets the channel that the DSP is being applied to.

Gets the BASS_CHANNELINFO of the assigned ChannelHandle.

This property returns the actual number of channles of the sample data BASS is using with the channel (e.g. 1=mono, 2=stereo, etc.).

This property returns the actual sample rate in Hz of the sample data BASS is using with the channel (e.g. 44100).

Gets or Sets the dithering bitdepth of the triangular probability density function (TPDF) - default is 0.7.

Returns the actual DSP handle (or 0, if the DSP has not been assigned to the channel).

Sets or reassigns the priority of the DSP, which determines it's position in the DSP chain - DSPs with higher priority are called before those with lower.

Returns the actual DSPPROC (callback delegate) which is used by the DSP.

Is the DSP assigned to an active channel? (=assigned, =not assigned).

Returns if the DSP is currently bypassed (=bypass).

Gets or Sets, if Dithering should be used (default is ).

Gets or Sets the value of the user instance data to pass to the callback function (see DSPCallback(Int32, Int32, IntPtr, Int32, IntPtr)).

Gets or Sets the Wet/Dry ratio between 0.0 (dry, unprocessed signal only) and 1.0 (wet, processed signal only) - default is 0.5.

Gets or Sets the stereo wide (coefficient) controling the stereo enhancement between 0.0 (narrow, mono signal) and 10.0 (wide, enhanced stereo signal) - default is 2.0.